1. Imported brushless motor is used for long service life.

2. Continuous operation without heat, 24 hours non-stop operation.

3. Low noise 50db, creating a quiet and comfortable working environment.

4. With linkage function, it can start and stop synchronously with the milling machine.

5. Wide voltage 3-32VDC signal to meet more milling machines.

6. Can connect two zirconia milling machines at the same time.

7. Can carry two working stations.

8. Can carry four sandblasting machines.

9. Can carry two dry grinders.

10. With automatic pulse dust removal function.

11. Pulse interval and pulse intensity are adjustable.

12. Double filtration, filtration efficiency up to 99%

*There are dust suction ports on both sides of the machine, which are suitable for all
CAD/CAM milling machines. The common interface diameters are 32/40/50cm, and
you can select either or open them at the same time.*Connect the pipe, turn on the
machine switch, and adjust the suction force appropriately.

*Connect the milling machine linkage signal to the vacuum cleaner linkage interface,
and connect the positive and negative poles to achieve synchronous start and stop
with the milling machine.

*Connect the air source to the vacuum cleaner pulse interface, turn on the dust
removal switch, and the machine starts pulse backblowing dust removal. You can also
set the pulse dust removal interval time as needed and turn on the automatic dust
removal function for a long time.