Light Curing Polymerization Machine

Power:120W
Voltage:110V/220V
Frequency:50hz/60hz
Wavelength:395nm,405nm,460nm
Size:305mm*240mm*290mm
Weight:8.7kg

●Automatic door opening and closing (pop-up).

●High-quality LED lumen lamp beads, long-lasting use and stronger penetration.

●Multiple wavelengths combined for wider application range.

●Rotating tray + top and side illumination, true 360-degree no dead angle.

Four sets of timing buttons to meet the curing time of different materials.
Default setting time:TIME1=30seconds, TIME2=1minute,TIME3=3minutes,
TIME4=10 minutes.

Timer setting: TIME1 key is the confirmation key, TIME2 key is the subtraction key,
and TIME3 key is the addition key.

For example: to set the time of TIME2, press and hold the TIME2 key until the value
on the right side of the display window flashes, then release it. (The value on the
right represents seconds 0-59 seconds) At this time, you can use TIME3 to increase
the value or use TIME2 to decrease the value. When the seconds are adjusted, press
the TIME1 key to confirm, and then enter the minute setting. At this time, the value
on the left side of the display window flashes (the value on the left represents
minutes 0-99 minutes). After adjustment, press the TIME1 key to confirm, and then
press the TIME1 key again to exit the setting interface. It means that the time setting is completed and automatically saved.

According to different materials, select the required curing time, press the
corresponding button, and then press it again to start the operation. The countdown ends and stops automatically.