Conjoined Stealth Injection Molding Machine

Voltage：110V/220V

Power consumption：350W

Weight: 33KG

Packing volume: 57*40*34CM

The Made designed and Manufactured by our factory ,and The machine is made of 2 parts . one is the pressure casting frame , and the other is automatic temperature controller .

The machine have 3 advantaged functions : automatic temperature control , automatic keep temperature and notice on setting time . this machine is improved by old style ,so cooperate more easily . which is the basic necessary equipment both for dental laboratory and clinics .

SETTING UP:

1.The combined injection machine : first fixed the pressure casting frame on the top of the working station , and the 3 pieces of strength bars tight accordingly . Put the flasks on the bottom base plate of the frame , then the heating furnace will installed up of the flasks ( just in the middle of the Columns . the feeder bar should dig into the under hole of heating furnace . Put the heating tube into heating furnace and above of the the feeder bar. and put the cartridge into The heating tube (it is better if you scribble some high temperature oil around the cartridge ,so that can convenient to take off from the heating tube)



2.The part injection machine: please first fixed the pressure casting frame on the top of the working station , and the 3 pieces of stain steal strips tight accordingly . Put the flasks on the bottom flats of the frame . Put the heating barrel into heating furnace which on top of temperature controller , and put the cartridge into The heating tube (it is better if you scribble some high temperature oil around the cartridge ,so that can convenient to take off from the heating barrel)

3.The Pneumatic injection :Please contact the machine with the air Compressor completely .the air compressor to be adjusted to 0.35mpa-0.4mpa. Put the flask on the base plates of the pressure frame .Put heating furnace Just according to the flask hole ,and equipped on the top of the the two side of columns . please put the feeder bar into the bottom hole of the heating furnace ,Put the heating barrel into the heating furnace ,but must up the feeder the bar (its very important ) , Put the cartridge into the heating barrel (it is better if you scribble some high temperature oil around the cartridge ,so that can convenient to take off from the heating barrel)

4. please contact the different wires accordingly.

The combined injection including the power wire ,the ceramic head heating wire ,and the thermocouple wire .

The part injection including : the power wire ,the ceramic head heating wire ,and the thermocouple wire .The pneumatic injection including : the power wire